返回列表 回復 發帖

[求救] Magic (HERO ROM) hard reset dead!



home+back, off keys couldn't hard reset it.   when i turned it on again, it goes to the HERO logo screen.

then i tried to reflash it with the HERO ROM.  

"back"+"on/off" key goes to FASTBOOT.   then connect with USB cable..  FASTBOOT USB screen on mobile.

the problem is now MY COMPUTER CAN"T DETECT IT!..    it can't connect to my computer with a usb cable now...  help....  is it bricked?  

Thanks!


你插左線....fastboot 果隻字有個變做fastboot USB?
你插左線....fastboot 果隻字有個變做fastboot USB?
開荒牛 發表於 2009-8-9 22:07
Yes!  It changes to FASTBOOK USB.  And I could hear a sound in my computer actually. The problem is I can't see any new drive appearing...    I tried another computer (also win7). Installed the drivers all over again there.  Still, I can't see new drive. I changed another USB cable and even another microSD card.. same thing...
本帖最後由 g2lover 於 2009-8-9 23:27 編輯

Ok. Now I RE-INSTALLED the Windows 7!  

This is what I'm going to do:

1) create folder C:\android
[done]
2) download and unzip hkgphone_heromclogopack.rar in the above folder
[done]
3) download and unzip android-sdk-windows-1.5_r3.zip
[done]
4) boot Magic to FASTBOOT mode by pressing "back" and "on/off"
[done]
5) connect Magic to computer with a USB cable, the Magic will turn to FASTBOOT USB mode
[done]
6) the Windows will ask for installing driver to the detected device, install the driver in sdk../...x86 folder
---- ok the windows found the device "Android 1.0" and tried to automatically find a driver for it but failed.
---- so I installed the driver found in "C:\android\hkgphone_heromclogopack\usb_driver\x86" for "Android 1.0"
---- "HTC Bootloader" driver was successfully installed. I can see this below "ADB Interface" in device manager.

at this point, i should be able to see the Drive X: of microSD card...

---- THE PROBLEM IS THAT I canNOT see the drive for microSD card...!!

7) run "flash.bat" in hkgphone_heromclogopack to flash Magic to HERO again
8) done.

That's my plan.  Everything alright?
Does that mean my Magic becomes a Brick now...?   -_-"
Does that mean my Magic becomes a Brick now...?   -_-"
g2lover 發表於 2009-8-9 23:55
你試下用card read 讀取你張card ...放個update 入去...
再入fastboot mode flash 一次
你試下用card read 讀取你張card ...放個update 入去...
再入fastboot mode flash 一次
developer 發表於 2009-8-9 23:59
"fastboot mode flash"  how do I do this?  home+back, + on/off will keep showing HTC and HERO logo....  can't let me go into nandroid mode..  
"fastboot mode flash"  how do I do this?  home+back, + on/off will keep showing HTC and HERO logo....  can't let me go into nandroid mode..  
g2lover 發表於 2009-8-10 00:02
你要取出電池....唔好插usb 住....
入返舊電...back + on/off
入左fastboot 先好插usb
你要取出電池....唔好插usb 住....
入返舊電...back + on/off
入左fastboot 先好插usb
developer 發表於 2009-8-10 00:05
I've been doing this for many times already....

4) boot Magic to FASTBOOT mode by pressing "back" and "on/off"
[done]
5) connect Magic to computer with a USB cable, the Magic will turn to FASTBOOT USB mode
[done]

---

I could hear a sound in my computer showing it actually detects the phone connected. The device manager shows "ADB Interface->HTC Bootloader" when the phone is connected...  but just I can't see the drive...
In FASTBOOT mode..  There's an option:
<VOL DOWN> HBoot Mode

---
I tried to press the Volume Down key, it shows:

SD Checking..  
Loading... [SAPPDIAG.zip]
No Image!
Loading... [SAPPDIA2.zip]
No Image or wrong image!
Loading...[SAPPDIAG.nbh]
.....
In FASTBOOT mode..  There's an option:
HBoot Mode

---
I tried to press the Volume Down key, it shows:

SD Checking..  
Loading... [SAPPDIAG.zip]
No Image!
Loading... [SAPPDIA2.zip]
No Image or wrong ...
g2lover 發表於 2009-8-10 00:17
你入左fastboot mode ...在電腦按flash.bat 有咩反應?
你入左fastboot mode ...在電腦按flash.bat 有咩反應?
developer 發表於 2009-8-10 00:29
Error window pops up:

The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this program.
Error window pops up:

The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this program.
g2lover 發表於 2009-8-10 00:40
你只要將這個 attachment ...
unzip 後....將AdbWinApi.dll 放到C:/windows/system32 裡就可以了
附件: 您所在的用戶組無法下載或查看附件
I followed your solution and copy/paste the file into system32.  Then run flash.bat....

Know what, the Magic vibrated!!! Then.. OH!! I saw the black background, yellow text system recovery utility!!!!!  I wanna cry now!!!!!!!!!!!

So I need to choose Apply sdcard:update.zip, right??
I followed your solution and copy/paste the file into system32.  Then run flash.bat....

Know what, the Magic vibrated!!! Then.. OH!! I saw the black background, yellow text system recovery utility!!! ...
g2lover 發表於 2009-8-10 00:58
yes right...
continue then back to magic ....
congratulations!!!!
It's back to my HERO ROM!  (update.zip is jacHERO ROM)!  Yeah!!!  

Thank you for staying with me for so long!!    ~_~

Why was the AdbWinApi.dll file not there in system?
It's back to my HERO ROM!  (update.zip is jacHERO ROM)!  Yeah!!!  

Thank you for staying with me for so long!!    ~_~

Why was the AdbWinApi.dll file not there in system?
g2lover 發表於 2009-8-10 01:07
you are welcome!
I have same problem.  I got it vibrate but then stop at the booting logo.
And I take take the battery out and try to boot into recovery mode it comes up "E:Can't open /cache/recovery/command"
What should I do with it?? Please help......
Thanks....
I also have the same problem. I  had go to HTC and SMT they all reject me to repair.
拿去先達又冇人識整,各位大哥可否step by step咁在教一次, 我部机買咗一個星期咋....
AdbWinApi.dll 放到C:/windows/system32 裡就可以了  9唔明]
HELP!!!! 2個方法都唔得
返回列表
重要聲明:本討論區是以即時上載留言的方式運作,HKGphone.com對所有留言的真實性、完整性及立場等,不負任何法律責任。 而一切留言之言論只代表留 言者個人意見,並非本網站之立場,用戶不應信賴內容,並應自行判斷內容之真實性。於有關情形下,用戶應尋求專業意見(如涉及私人、買賣、醫療、法律或投資 等問題)。 由於討論區是受到「即時留言」運作方式所規限,故不能完全監察所有即時留言,若讀者發現有留言出現問題,請聯絡我們。 HKGphone.com有權 刪除任何留言及拒絕任何人士留言,同時亦有不刪除留言的權利。 切勿撰寫粗言穢語、誹謗、渲染色情暴力或人身攻擊的言論,敬請自律。 本網站保留一切法律權利。